Horse Breeds at HorseChannel.com

Sand for Riding Arena Footing

Using the right footing and maintaining it properly will make for better riding in your arena.

Printer Friendly

Arena footingSand is the most common arena footing used throughout the United States and is a good shock absorber. The best sand for a riding arena is usually hard, cleaned and screened, and of medium coarseness. Cleaned means silt and clay have been washed out of the sand; screened means that large grains have been removed, so the sand is more uniform. Hard sand won’t break down as quickly. Because sand drains so well, it requires frequent watering. Some people choose to help sand along by adding wood or other materials that hold water (See “Hot Tip” pg. 88). Sand that has been correctly watered (not so much water that it becomes slick) will provide better traction than dry sand.

George Chatigny, general manager of the Los Angeles Equestrian Center, recommends starting with about 2 inches of sand footing atop your base. “Start off with a limited amount of material—2 to 3 inches. Ride on it and see how well it works. If you think that it’s too thin or patchy, then bring in more. It’s always easier to add more than to take away.”

Over time, sand, like other footing, will break down. “Your footing will become tired,” George says. “It will break down into finer granules, and then it will not be as forgiving. At that point, maybe two to three years down the road, you want to take all that sand off, down to your base, which should still be at the same pitch and level as where you were.” George says to regrade the base a little bit and level it off, then place your new footing on top.

Further Reading
At-home Arena Maintenance

Printer Friendly

 Give us your opinion on
Sand for Riding Arena Footing

Submit a Comment   Join Club
Earn 1,000 points! What's this?


Top Products